Triumph T140E fork seals replacement

rnexussix's picture
Submitted by rnexussix on Wed, 01/19/2011 - 10:28

Another great DYI from "lunmad". Note how he improvises the proprietory Triumph tools when the need arises

Part 1:

"... removing the handlebars, wheel, brake calliper and sliders. I managed to undo the slider bolts without the use of the damper rod tool I do have to use it for reassembling though..."

Part 2 :

"..removing the sliders, removing and replacing the seals I also make a tool for holding the damper rod still."

Part 3:

"... The last bit of doing the oil seals, reassembling the forks be careful and walk the seal over the edge of the fork leg. 
I did not film fitting the bars (sorry)"

Bookmark/Search this post with
  • del.icio.us
  • Digg
  • Facebook
  • LinkedIn
  • MySpace
  • Twitter
No votes yet
  • 1067 reads

Comments

Post new comment

The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Disclaimer

The content of this MotoHowTo.Com post is informational, not instructional. Improperly performed motorcycle maintenance, or repair may cause; accident, serious injury or death. If you are not a trained motorcycle mechanic, consider taking your motorcycle to a trained motorcycle mechanic, authorized dealer, or the after-market motorcycle parts installation facility.